RedRock Cup Holder (18-25 Jeep Wrangler JL)

There really should be cup holders here from the factory. This is the best cup holder solution I’ve found so far. The middle bottom area does not fit exactly like the old piece, there’s a slight gap but it’s not that bad.

Install was relatively easy, getting the last two bottom torx screws out and back in is kind of tough. I recommend propping up the console with something while you try to access those screws.

This is a nice addition to add more cupholders which these are lacking. It isn't that close of a color and texture match to the OEM console. I will take function over looks at this point. It could easily be made a darker black to match closer if they cannot get the texture the same.

I wanted to give this product a 5, but several things drove me to a 3. On an up note, the cup holders are rather large and will most bottles. That said, things I hate. Quality of the plastic is average at best. Very slight pressure in the wrong place and the mounting point and it will break off. The other consideration is the cup holder itself is NOT a drop in. You will need to disassemble the rear of the center console and 2 of the torx screws are a bitch to access! Lastly, the plastic texture and color are noticeably different. If you are looking for a solution to replace the lame OEM holder, this might be one of the better options available. Time will tell how it holds up with people getting in and out and knocking it around. I will hold on to the original part just in case.

Not sure why cup holders are not standard however these were simple.to install and well needed when you have more than 2 in the back. Holder is sturdy and of great quality

Fit and finish it quality it does help to have a second set of hands as you have to hold the center console up to gain access to two screws otherwise 10 minute job